Initialize All - JVC KW-V11E Service Manual

Text
TOU: Y or N Display of status of touch panel adjustment
by production line.
Y: adjustment complete
N: not adjusted.
*Display NG in red.
SUM ******** Display of APP micro-controller program ar-
ea's sum and check sum results. Check sum
OK or NG.
*Display NG in red.
SUM ******** Display of APP micro-controller design data
area's sum and check sum results. Check
sum OK or NG.
*Display NG in red.
S.NO Display of serial number.
No entry: - - - - - -
Model without serial no.: None
Indicate "- - - - - -" in red.
Models without serial no. are as follows.
Destinations: J, JW, E, EE, A
DATA1 **** Displays the opening data version.
SUM ******** Display of opening data area's sum and
check sum results. Check sum OK or NG.
*Display NG in red.
DATA2 **** Displays the wallpaper data version.
SUM ******** Display of opening data area's sum and
check sum results. Check sum OK or NG.
*Display NG in red.
DATA3 **** Displays the steering remote control thresh-
old version.Displays the version number
when threshold data is written using USB.
For DOP models, display as follows as the
value is fixed from the beginning.
HONDA: KC
MAZDA: KF
MITSUBISHI: KG
ISUZU: KJ
NISSAN1: KS1
NISSAN2: KS2
TOYOTA: KL
DATA4 **** Display of DEMO image version
(Commercially="1000")
SUM ******** Display of opening data area's sum and
check sum results. Check sum OK or NG.
*Display NG in red.
Description
(No.MA601<Rev.001>)24/30
4.3.3.1

INITIALIZE ALL

Same as service mode.
4.3.3.2 S/N WRITE & RGB(SXM) TERMINAL CHK
Mode for entering the serial number.
*This will not be displayed for models without the NAVI and Sxi
terminals.
4.3.3.3 MONITOR ADJUSTMENT MODE
Mode for adjusting the image quality on the production line.
Display the following.
In this case, regardless of the current source, set Video selector
to R-CAM, and display the external input video in the back-
ground.
(This is for adjustment by inputting composite signal in a white
image from an external pattern generator.)
Restore the Video selector to the original state when exiting this
adjustment mode.
• As adjustment is performed while pressing the sensor of the
measuring instrument against the center of the monitor, dis-
play the adjustment button and STORE button on the Aright
side of the screen.
Adjustment items are only 3 items, Drive R/G/B only, and press-
ing the STORE button writes the adjustment value into F. ROM.
4.3.3.4 BT MICROPHONE TEST
Same as service mode.