Section 4 Adjustment - JVC KW-V11E Service Manual

4.1 Test Mode
4.1.1 List of special modes
Mode name
TUNER span switching
Memory clear
SS mode
Service mode
Opening Customize Mode
(and) Setting Rewrite mode
Force EJECT
4.2 Service Mode
4.2.1 Switching to service mode
Note: Confirm that the Bluetooth is not connected.
• While pressing the [EQ] key (1), touch upper left corner (2) of
the touch panel within 0.5 seconds, and then touch upper right
corner (3) of the touch panel within 2 seconds.
(2)
SECTION 4
ADJUSTMENT
Description
Switches TUNER frequency step/span.
Clears the backup memory and installer memory.
Special service mode that is entered from the production
mode.
Mode used by engineers or servicing personnel.
Note: Confirm that the Bluetooth is not connected.
Mode used by sales and retail.
Overwrites the start-up screen with DISC/USB.
Overwrites the initial settings after factory shipment.
Example: DEMO=OFF, NAVI=ON, etc.
Mode to use when the DISC cannot be ejected.
(3)
(1)
(No.MA601<Rev.001>)17/30
Press and hold the [DISP] key and
[EJECT] key, and press the [RESET] key.
INITIALIZE inside the Setup menu
(INITIALIZE in the service mode)
Press and hold the [EQ] key and [DISP]
key, and press the [RESET] key.
While pressing the [EQ] key, touch up-
per left corner of the touch panel within
0.5 seconds, and then touch upper
right corner of the touch panel within 2
seconds.
While pressing the [EQ] key, touch
lower left corner of the touch panel
within 0.5 seconds, and then touch
lower right corner of the touch panel
within 2 seconds.
Press and hold the EJECT key for 10
seconds.
4.2.2 Display specifications
Service Mode Page1 <DAB MODEL>
Service Mode Page1 <Except DAB MODEL>
Key used