Speed Defrost - Oster OGZC1101 User Manual

OPERATION INSTRUCTIONS (continued)
Use single digits to set a cooking power level:
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
SET STAGE 1:
1.
Follow steps 1 and 2 in "One-stage Cooking". Do not touch START/STOP.
SET STAGE 2:
2.
Touch COOK then enter proper cooking time and (lower) power level. Most 2-stage recipes use lower power
for second stage.
Touch START/STOP.
3.
NOTE:
• After total time elapsed, the system will sound beeps with END in display. The beeps will continue to sound
every two minutes automatically until the door is opened or any pad is touched.

SPEED DEFROST

Touch SPEED DEFROST.
1.
Enter desired defrosting time by touching correct number pads.
2.
Touch START/STOP.
3.
NOTES:
• After total time elapsed, the system will sound beeps with END in display. The beeps will continue to sound
every two minutes automatically until the door is opened or any pad is touched.
• After setting SPEED DEFROST, oven can be programmed to automatically switch to one or two-stage cooking.
• For speed defrost and one stage cooking, follow steps above. Before touching START/STOP, touch COOK pad,
enter time and power level. Then touch START/STOP.
• For speed defrost and two stage cooking, follow steps above. Before touching START/STOP, touch COOK pad,
enter two-stage cooking programs again.
• During cooking, the oven will beep and pause to remind you to turn food over and then press START/STOP to
resume.
Number pad Cooking power
1,0 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
8