Faq - TrekStor Talon S2 Manual

• Mark a channel for skipping
With this function you will be able to skip a marked channel, which means, the channel
will not be displayed any more when changing the channels with K or L.The channel
will only be displayed after entering the channel number or after directly choosing it
within the channel list. You can mark a channel for skipping by pressing the green button.
• locking a channels
Press the yellow button, in order to lock the marked channel. When you switch to a locked
channel you will be asked to enter your password.
After entering the password, the channel will be unlocked until switching off the
i
SatReceiver!
• Deleting a channel
Press the blue button, in order to delete the channel out of the channel list. You will be
asked to confirm your choice by pressing the k button.
• adding a channel to the favorite list
Press the B button, in order to add the channel to one of the favorite lists ("m
"N ", "S " or "m
ewS Port
menu appears, out of which you can add or delete a marked channel to/from a favorite
list. In case you are choosing "S
lists. You can leave the favorite lists by pressing the D button.

5) FAQ

In this chapter you receive answers to the most frequently asked questions as well as notes
about troubleshooting.
I have connected the satreceiver to my tv. Why is no picture displayed on the screen
of my tv respective why is there no sound output?
That problem may have several causes. Please check the following points:
i
1) Please make sure, that you have chosen the right AV source on your TV or HiFi system.
2) Please check, if you have connected the correct cable for video/audio output signal.
You can find information about the right connection of the SatReceiver to your TV and
your Home Entertainment-System within the chapter "Connection with your Home-
Entertainment-System" inside that manual.
3) Even if you have connected your SatReceiver correctly, a wrong video output signal may
be adjusted. In order to change the output signal, press the green button on the remote
control. Please shortly wait until the SatReceiver and your TV have made the changes.
Repeat that process as long as the picture is displayed correctly on the TV.
I only see the message "No Signal" on the screen of my tv. What is the reason?
The SatReceiver has no connection to the satellite system.
i
1) Check the channel list, if the chosen channel is send by a satellite, to which your satellite
system is adjusted.
2) Check the satellite dish as well as the cable, which is connected to the SatReceiver.
") or to delete it from a favorite list. After pressing B or k a
uSic
o " the channel will be deleted out of all favorite
witch FF
",
ovieS
27 EN