TrekStor Talon S2 Manual page 22

a) Please connect, as described above, your SatReceiver first with your satellite dish, then
with your TV or your Home-Entertainment-System and afterwards with the power supply.
b) Switch on the SatReceiver with a push onto the
c) A welcoming screen appears. Now you can first choose the menu language, which you
would like use (default: "g
d) Switch to the next menu item by using the L button. Now open the menu item
"S S
AteLLite ettiNgS
e) Inside this menu please choose the desired satellite by pressing the L or K button and
mark your choice by using the k button. In most cases that is the Satellit Astra 1H on the
position 19.2° E (storage location 002 inside the default satellite list). Below the channel list
you can find a bargraph, on which the "Q
In case you would like to change the settings, which are displayed within the right half of
the menu, press the M button and carry out the desired change. The settings concerning
the satellite system are saved by pressing the D button.
EN 22
").
ermAN
" by pressing the k button.
button at the device.
/
" of the current signal is displayed.
uALity