Connection; Connecting With Video Equipment; Connecting Hdmi Devices - BenQ HT3050 User Manual

Connection

When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Make sure the cables are firmly inserted.
• In the connection illustrations shown below, some cables may not be included with the projector (see
Shipping contents). They are commercially available from electronics stores.

Connecting with video equipment

You need only connect the projector to a video source device using just one of the connecting methods.
Each video source provides different picture quality. The method you choose most likely depends upon
the availability of matching terminals on both the projector and the video source device as described
below:
Terminal name
HDMI1
HDMI2/MHL
HDMI3/MHL
COMPONENT
VIDEO
PC (D-SUB)
In the connection illustrations shown below, some cables may not be included with the projector (see
Shipping contents). They are commercially available from electronics stores.

Connecting HDMI devices

HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between
compatible devices like DTV tuners, DVD players, Blu-ray players and displays over a single cable. You
should use an HDMI cable when making a connection between the projector and HDMI devices.
HDMI device: DVD player, digital tuner, etc.
Terminal
appearance
• Connecting HDMI devices
• Connecting smart devices
• Connecting a wireless Full HD Kit
(WDP02)
Connecting component video devices
Connecting video devices
Connecting a computer
HDMI cable
Reference
To make sure you select a correct input source type
for the HDMI signal, see
Picture quality
Best
Better
Normal
Better
HDMI Settings for details.
Connection
15