Units With Timer; Safety Device; Maintenance And Service; Technical Characteristics - DeLonghi TRD40820 Instructions For Use Manual

automatically and keep it constant. If your unit is a three-output
version, in intermediate seasons or on days when temperatures
are not particularly cold, select minimum output to optimize
savings and consumption.
Antifreeze function
Turn the thermostat dial to the
selector to position MAX. The appliance will maintain a
minimum room temperature of approximately 5°C, thus
preventing freezing while conserving energy. In models that
come with a timer, teeth must be set in the inward position.
Reminder
To completely shut the appliance off, turn the power selector to
the "0" position and then unplug the appliance from the outlet.

UNITS WITH TIMER

How to use the timer
To program heating, proceed as follows:
- Look at the time on your clock or watch. If it is 10 p.m.,
turn the numbered timer disk clockwise until the number
22 (10 p.m.) on the disk coincides with the pointer s (3)
on the timer. Set the periods of time when you want the
appliance to work by pushing the teeth (1) inward. Each
tooth (1) corresponds to a period of 15 minutes. This
will leave visible sectors which correspond to the periods

TROUBLESHOOTING

PROBLEM
The appliance doesn't work
position and the power
CAUSE
Be sure it is plugged in and that the
electrical outlet is working.
Check for any obstruction.
The temperature may be set too low.
of operation (2). When set, the radiator will operate
automatically each day during the times programmed
(important: the radiator must always be plugged into the
socket).
- To change the programming, move the teeth back into the
initial position and set the new periods of operation.
- If you want to make the appliance operate without
programming, push all the teeth inward. In this case, to
turn the appliance off completely, as well as turning the
dial to the off position, you must also unplug it from the
power outlet to avoid continued operation of the timer.
IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTER-
CLOCKWISE.
The timer is like an electric clock, and will only work when
plugged into a power supply. When unplugged, the timer stops
and must be later re-set.

SAFETY DEVICE

A safety device switches the heater off in the event of
overheating. To restart the heater, call the nearest De'Longhi
Customer Service.

MAINTENANCE AND SERVICE

Always unplug the heater from the power outlet and allow the
radiator to cool.
Wipe radiator with a soft damp cloth; do not use detergents
or abrasives. Should the radiator not be in use over a certain
length of time, wind the cord around the holder and store it in
a dry place. This appliance has been built to last for many years
of trouble-free service. In case of malfunction or doubt, do not
try to repair the heater by yourself: this might increase the risk
of fire and electric shock. Call your nearest De'Longhi Customer
Service (see attached list of Service Centers).

TECHNICAL CHARACTERISTICS

Power supply
Absorbed power
Plug into the power outlet.
Remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact the nearest
De'Longhi Customer Service.
Set the temperature to a higher position.
6
See rating plate
"
SOLUTION