IMPORTANT SAFETY INSTRUCTIONS *When using a commercial spotter, basic precautions should be followed, including the following: *Read all instructions before using this commercial spotter. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING To reduce risk of fire, electric shock, or injury: •...
Operating Instructions for Commercial Spotter shown on the nameplate of the machine. Do not attempt to plug a 115 volt machine into WHEN THE MACHINE IS DELIVERED… a 230 volt outlet or a 230 volt machine into a 115 volt outlet. Check the carton carefully for signs of rough han- Disconnect the power cord from the outlet before dling.
Operating Instructions for Commercial Spotter Filling the Spotter Disconnect the solution and recovery tanks. Add water and or chemi- cals to the lower solution tank. The tank will hold up to 3.5 gallons. Operating the Spotter A. Attach the solution feed line to the quick disconnect at the bottom of the machine.
Parts List ref. # order # description ref. # order # description 85558 85588 CASTER SWIVEL 45MM WASHER 5/8" X 1-3/16" NEOPRENE BOND 85559 SCREW 1/4-20 X 1/2" PHIL. STAINLESS STEEL 85589 ANCHOR CONECTOR 1/8" 85169 WASHER 1/4 MED SPLIT LOCK ZINC 85618 FITTING ELBOW 90 DEGREE 1/4-1/8 85082...
Page 8
Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling.
Need help?
Do you have a question about the E85509-00 fiberpro and is the answer not in the manual?
Questions and answers