Related Manuals for BETCO HF14
Summary of Contents for BETCO HF14
- Page 1 E88820-00 14” Upright Vacuum HF14 HF14 with HEPA Filter Operator and Parts Manual 1001 Brown Avenue • Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TECHNICAL INFORMATION ........... 3 GENERAL SAFETY INFORMATION ......4 - 5 MACHINE PREPARATION AND OPERATION ....6 - 7 MAINTENANCE ............8 - 9 MACHINE DIAGRAM AND PARTS LISTING ..10 - 13 WIRING DIAGRAM ............14 WARRANTY ..............16... -
Page 3: Technical Information
TECHNICAL DESCRIPTION Measurement Unit HF14 Vacuum Motor Power Watts 1000 Brush Motor Power Watts Dust Bag Capacity Gallons Working Surface Inches Weight Lbs. Noise Level dB(A) Voltage Volt / HZ 120 Volt / 60 HZ... -
Page 4: General Safety Information
GENERAL SAFETY INFORMATION PACKAGING • The box and packaging materials have been designed to protect the applian ce during shipping and are biodegradable and recyclable. Please dispose of these items as you would any other product that can be recycled. USED VACUUM CLEANER •... - Page 5 GENERAL SAFETY INFORMATION • Only wipe the appliance clean with a dry (or very slightly damp) cloth while it is unplugged. Never place the appliance in water. • Never clean up anything that is burning or smoking, such as cigarettes, matches, hot ash, etc. •...
-
Page 6: Machine Preparation And Operation
MACHINE PREPARATION AND OPERATION 1 Ergonomic handgrip 2 Power cable 3 Hose 4 Telescopic extension 5 Switch 6 Carrying handle 7 Cord Wrap Hooks 8 Hatch 9 Air vent 10 Motor housing 11 Electric brush 12 Base 2. CONNECTING THE HOSE Insert the straight coupling into the dust bag container hole: insert the angled coupling into the side slot of the motor housing. - Page 7 MACHINE PREPARATION AND OPERATION 4. STARTING UP THE BRUSH To operate: Use your foot to press the cover (A) and lower the cleaner at the same time. 5. CHECKING THE BRUSH The brush control device constantly checks the brush operation: •...
-
Page 8: Maintenance
MAINTENANCE 1. FILTER DUST BAG REPLACEMENT Remove the hatch. Place paper bag in the container, inserting the bag sup- port fi tting into the hole in the bag and pushing the sa fety ring as far as it will go. If the fi lter bag is not correctly positioned, it will not be possible to close the hatch. - Page 9 MAINTENANCE 4. REMOVING OBSTRUCTIONS FROM THE EXTERNAL HOSE • Obstructions can be removed from the hose by sliding the hose out from its seating and starting up the suction function but blocking it intermittently with your hand. • Do not insert any items to remove obstructions from the pipe. 5.
-
Page 10: Machine Diagram And Parts Listing
BASE SPARE PARTS DIAGRAM... - Page 11 BASE SPARE PARTS LISTING Item # Part # Description Item # Part # Description E22020 Lower Base E22061 Screw, M3 x 20, Phps Pan Head Tapping E22060 Screw, M4.2 x 16, Zinc Phps E22062 Screw, M3.5 x 16, Phps Pan Head Tapping E88929 Roller Brush Assembly E88931...
- Page 12 VACUUM BODY PARTS DIAGRAM...
- Page 13 E22061 Screw, M3 x 20, Phps Pan Head Tapping E22054 Cord Guide E22044 Indicator, Full Bag E88946 Cord Wrap Assembly, Upper E88772 Filter Bag, HF14 (Pack of 10) E88944 Switch, On/Off E88941 Hose, Vacuum E22056 Cover, Switch E88940 Wand, Telescoping...
-
Page 14: Wiring Diagram
WIRING DIAGRAM CAUTION! Any job involving the electric equipment must be carried out by qualifi ed personnel only. -
Page 16: Warranty
Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling.
Need help?
Do you have a question about the HF14 and is the answer not in the manual?
Questions and answers