Sharp LC-32LE700E Service Manual page 24

LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
12. Handling notes (46 inch models).
1. Set and connect LED-PWBs.
INSIDE of
BL-CHASSIS
WIRE HARNESS
Set and connect LED-PWBs
RUNTKA595WJ**
LED-PWB set direction
(arrow mark to harness side)
Boss of
BL-CHASSIS
LED-PWB
Boss fitting
(showing in blue circles)
2. Peel off the lamination film of LENS SHEET on the both sides.
Peel off the lamination film of LENS SHEET on the both sides.
RUNTKA595WJ01 / WJ02 RUNTKA596WJ01 / WJ02
Top Side
Bottom Side (C-PWB side)
*Same for other lines.
RUNTKA596WJ**
LED-PWB set direction
(arrow mark to harness side)
Connect LED-PWBs
Insert the connector horizontally mutually.
Do not add impossible power.
FRONT
RUNTKA598WJ01 / WJ02
Peel off the lamination film.
4 – 13
RUNTKA***WJ01
RUNTKA***WJ02
RUNTKA***WJ01
RUNTKA***WJ02
CAUTION
RUNTKA***WJ01
It being alternated
RUNTKA***WJ02
RUNTKA***WJ01
RUNTKA***WJ01
and RUNTKA***WJ02.
RUNTKA***WJ02
RUNTKA***WJ01
RUNTKA***WJ02
RUNTKA***WJ01
RUNTKA598WJ**
LED-PWB set direction
(arrow mark to harness side)
BACK
TERMINATOR
is Attached