Advertisement
* Volume control button: It is to adjust talking volume from counter side.
* Calling sound level control button: It is to adjust calling sound
* Screen resolution Button: It is to adjust image resolution.
* DIP switch for camera setting: It is to set up the availability of door camera.
Please place it "up" position while door camera is in use.
Note : camera 1, 2 is set to use from manufacturer as default.
2. Operation Methods
How to operate
●
Receiving a calling from visitor
1. When the call button is pressed by a visitor on the door camera, the melody shall be
rung and visitors' image is shown on the screen.
2. Press "talk" button(
(Maximum 60 seconds is available to talk on the phone.)
3. Press "talk" button(
4. Press "door release" button (
●
Communication with a interphone
1. Press "Interphone" button (
connected with monitor. (DP-4VHP)
(It is available to talk on the phone for Maximum 60 seconds)
2. When receiving a call from an interphone, electrical sound shall be rung.
Press "talk" button (
3. When you receive a call from camera while taking with interphone, Visitor's image should
be showed on the monitor.
It shall be possible to talk between each unit, monitor, interphone and camera.
Note : When you finish talking with visitor or interphone, press "talk" button again to close
the talk mode.
●
Monitoring.
1. When you press monitor button (
2. It can be connected up to 2 cameras and shows you the outside image from camera1 or
camera2 in order by pressing " monitoring" button.
) to talk with a visitor.
) again to close and return standby mode after finish the talk.
) to open the door while on the conversation.
) to make a conversation with the interphone
) to start to talk.
◎
), outside image is showed for 30 seconds.
5
Hide quick links:
Advertisement
