Appendix 4: Installation Of Secondary Air Tubes And Baffle - Century FW2600 Installation And Operation Manual

Century FW2600 Installation and Operation Manual

Appendix 4: Installation of Secondary Air Tubes and Baffle

1- Starting with the rear tube, lean and
insert the right end of the secondary air
tube into the rear right channel hole.
Then lift and insert the left end of the
tube into the rear left channel.
2- Align the notch in the left end of the tube
with the key of the left air channel hole.
Using a « Wise grip » hold the tube and
lock it in place by turning the tube as
shown. Make sure the notch reaches
the end of the key way.
3- Repeat step 1 and 2 for the other
secondary air tubes.
4- To remove the tubes use the above
steps in reverse order.
47