Table of Contents
Advertisement
Century FW2600 Installation and Operation Manual
Appendix 3: Installation and Use of Optional Air Circulation
Fan and Thermodisc
An optional fan can be installed on the back of the stove to increase the flow of air past
heat exchange surfaces and to help circulate warm air in the room. When used regularly,
the fan can provide a small increase in efficiency, up to 2 percent. However, the use of a
fan should not be used as a way to gain more output from a stove that is undersized for
the space it is intended to heat. You can purchase this option through your dealer. Make
sure to specify this part number: # AC02050
When using the optional fan, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the fan cools the
firebox and could affect the start-up combustion efficiency if the fan is turned on too early.
You can also install a thermodisc to enable the blower to start or stop automatically when
the stove is hot or too cold. The thermodisc part number is AC05530 for a basic model and
ACO2055 for a quick connect model. Installation instructions are supplied with the blower
and the thermodisc.
45
Advertisement
Table of Contents
