Safety Track UCIT PRO-4 Installation Manual page 4

Step 1:
Find a suitable location to mount the DVR
in such a way that is accessible to the fleet
manager. (To pull SD card and for troubleshooting)
Step 2:
Securely Mount DVR (Installers choice) by way of
self-taping screws, zip ties, double sided tape etc.
Step 3:
Run the GPS and Comm Antennas
(Anywhere that has a direct sightline to the sky
for best reception).
GPS Antenna: Square Shaped
Comm Antenna: Round Shaped
Step 4:
Mount the cameras as directed or as needed.
Each camera is individually packaged
with mounting hardware supplied. Unless
you decide to mount a different way.
Example: 3M Double sided trim tape.
Ensure cameras are aimed properly by
adjusting screws or post wheel.
(Depending on which camera you have.)
3