Notes And Precautions; Getting Started - Safety Track UCIT PRO-4 Installation Manual

Notes and Precautions

Please make sure power connections are clear to you before you make the
connection.
Please Follow this Guide STEP BY STEP do not skip around.
It is normally required to have a professional installer install these units.
Keep DVR System away from liquids, heavy dust and dirt, fire and extreme
temperatures.
Supply rated voltage, amp and proper fuses (if replaced) to the equipment.
If possible keep the equipment in a well ventilated area.
Review packing list or "whats in the box" to make sure you have everything.
NOTE: Any modifications to the device or software outside of company standards
or without company approval are not a responsibility of Safety Track and may void
the warranty.

Getting Started:

Familiarize yourself with the contents of the box. Plan where the DVR will be
mounted and how you will run the cameras before you connect to a power source.
Also keep in mind any special instruction from Sales Rep or Customer on
mounting location of the DVR, cameras and antennas. Remember to conceal all
wires and cabling the best as possible unless otherwise directed.
2