This is a step by step guide that will walk you through installing the UCIT
PRO-4 Channel Camera System. Basic wiring experience and knowledge
is required at the minimum.
system may not work properly. If you have any questions regarding the
installation of this system contact Support at 815-725-4400 or
Support@DriverLocate.com. We are always available for questions when
needed. Please take your time, take caution and Enjoy!
Tools Required:
•
Power Drill
•
Volt Meter
•
Wire Crimpers
•
Wire Strippers
•
Electrical Tape
•
Zip Ties
•
Wire Connectors (Installer's
Choice ex.T-tap, ring connector,
fuse taps)
•
Extra wire (Shouldn't need but
just in case)
•
Screwdrivers (flat head and
philips)
•
Self Tapping Screws
Please follow each
What's In The Box:
•
DVR
•
Camera(s) (individually boxed
with mounting hardware)
•
Camera Cable(s)
•
GPS Antenna
•
Comm Antenna
•
Microphone and Extension Wire
step, otherwise your
1