Everpower Electronics 3PA5015R User Manual

CAUTION
-
SAVE THIS INSTRUCTIONS This manual contains important safety and
1.
operating instructions for the 3PA5015R battery charger.
Please read the caution of batteries or devices you want to charge firstly!
2. When charging, batteries can emit explosive gases, therefore it is essential to
prevent flames and sparks. The charger is designed for charging lead-acid
batteries from 2 to 90Ah. Do not use for any other purpose.
3. Always provide good ventilation when charging.
4. Use of an attachment not recommended or sold by Everpower may result in a risk
of fire, electric shock or serious injury to persons.
5. To reduce risk of damage to electric plug and cord, pull by the plug rather than by
the cord when disconnecting charger.
6. An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure that: a) Pins on plug of extension cord
are the same number, size and shape as those of plug on charger; b) Extension
cord is properly wired and in good electrical condition; and c) Wire size is large
enough for ac ampere rating as specified in "technical data".
7. Do not operate charger with a damaged cord or plug-return the charger to the
place where purchased.
8. Never operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way; take is to a qualified serviceman.
9. Do not disassemble the charger; take it to a qualified serviceman when service
or repair is required. Incorrect reassemble may result in a risk of electrical shock
or fire.
10. To reduce risk of electric shock, unplug charger from AC outlet before attempting
any maintenance or cleaning. Turning off controls will not reduce the risk.
3PA5015R 12V Lead-Acid Battery Charger
User's Manual
Everpower Electronics Co.,Ltd