Panasonic NR-BW414MN Service Manual page 24

• Countermeasure No. 1
To addition insulation plate 2 pcs on cover coil and inner liner as below instruction.
1.1 To addition insulation plate on rear of cover coil.
Cover coil F
1.2 To addition insulation on inner liner.
Deflector at tube coil 1pcs.
Romve coil EVP.
Make few hole before re-assemble
support coil to inner liner.
Insulation plate
Cover coil
Add insulation plate
Remove Deflector for empty.
Assemble support coil to inner liner.
Coil EVP. Inner Liner
Remove screw support coil.
Add Insulation plate to rear of Coil EVP.
Ref.2 Add cable tie 1 pcs
- 24 -
NR-BW414 / NR-BW464
Insulation plate
Ref.2 Cable tie 1 pcs lock with tube
of coil EVP.