Advertisement
HOW MO' CONTROL CAN ACT AS A MIDI CONTROLLER
You've probably noticed the "MIDI Out" jack on the back of your Mo' Bass. You also may have
noticed that the MIDI Out function of the Mo' Bass is only possible when used in conjunction with
the Mo' Control, and that your Mo' Bass Owner's Manual asks you to refer to this manual for
more details. Well, here they are.
Basically, you can control both the Mo' Bass and your external MIDI-capable device by using the
Preset Group and Bypass switches on the Mo' Control. When connected to the Mo' Bass, the Mo'
Control sends simple MIDI program change commands through the MIDI Out Jack on the rear of
the Mo' Bass. (Again, the MIDI function on the Mo' Control/Mo' Bass system is for output only.)
Your control range will be six groups, and starting from 00 for the sake of this example, they cor-
respond as shown in the following chart:
Mo' Control
Solo Mode
Preset Group 1
Preset Group 2
Preset Group 3
Preset Group 4
Bypass
Connection is as simple as patching a MIDI cable from the MIDI Out of the Mo' Bass to the MIDI
In on your external effects device and patching that device into the Mo' Bass external effects
loop. For information on programming your MIDI device's presets to correlate to the Mo' Control
in your desired manner, please consult the MIDI device's owner's manual, or contact the manu-
facturer for more detailed information.
MIDI Device
=
Group 00
=
Group 01
=
Group 02
=
Group 03
=
Group 04
=
Group 05
MO' CONTROL USER GUIDE
7
Advertisement
