Advertisement
MO' CONTROL—REAR PANEL FEATURES (left to right)
• Effects Bypass Insert Cable
• Main Footswitch (DB9) Jack
• Preset Group Mode Switch
CONNECTING THE MO' CONTROL TO THE MO' BASS
Before connecting your Mo' Control to your Mo' Bass, it's best to turn your Mo' Bass power off.
Why? Mo' Control is powered by the Mo' Bass (you'll notice the lack of an AC receptacle on the
Mo' Control). Also, Mo' Bass and Mo' Control are "twins" when the units are connected – one
controls the other, and vice versa. The effects even have the same color LEDs. So if you connect
the Mo' Bass to the Mo' Control while the Mo' Bass is on, most likely all of the individual effects
will turn on and the LEDs on both units will illuminate. No harm will come to either unit, but if your
settings on the Mo' Bass are boosted – like, say, the Overdrive – you may hear a noise you
weren't expecting.
Now that your Mo' Bass is off, locate the DB9 cable (the one that looks like a computer cable)
and connect it from the "Foot Switch" DB9 jack on the rear of the Mo' Bass to the similar DB9
jack on the rear of the Mo' Control. This jack has a text box above it that reads "To Mo' Bass
Foot Switch Jack Only."
1 / 4
" Jack
TO MO'BASS INTERNAL
FX BYPASS ONLY
Effects
bypass
cable
Effects
bypass
cable
MO' CONTROL USER GUIDE
3
Advertisement
