Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SWR mo'CONTROL
Summary of Contents for SWR mo'CONTROL
-
Page 1: User Guide
USER GUIDE SWR • SCOTTSDALE, AZ • USA... - Page 2 We recommend that you read the following manual thoroughly and completely before using the SWR Mo’ Control. Have your Mo’ Bass manual handy as well, as we'll be referencing it frequently. After all, we want you to be as prepared as possible for the complete Mo’ Bass experience.
- Page 3 1 / 4 • Mo’ Control filter/bypass insert cable ( " stereo male to two " mono males) • SWR catalog MO’ CONTROL—TOP PANEL FEATURES Top Row (left to right) • Preset Group 1 switch • Preset Group 2 switch •...
- Page 4 MO’ CONTROL—BACK PANEL FEATURES (left to right) • Filter Pedal Range Control 1 / 4 • Filter/Bypass Insert Cable " Jack • Main Footswitch (DB9) Jack • Preset Group Mode Switch CONNECTING THE MO’ CONTROL TO THE MO’ BASS Before connecting your Mo’ Control to your Mo’ Bass, it’s best to turn your Mo’ Bass power off. Why? Mo’...
- Page 5 1 / 4 Next, locate the “insert” cable. This is the cable with one stereo " plug on one side and two mono 1 / 4 1 / 4 " plugs on the other. Insert the single stereo plug into the "...
- Page 6 “Dual Mode” is a mode of operation on the Mo’ Bass, and acts as an individual effect on the Mo’ Control. If you activate the Dual Mode switch on the Mo’ Control, the Mo’ Bass will split its signal into “clean” and “dirty” channels and route those split signals to different sides of the power amp. (For more information, please consult the “Dual Mode”...
- Page 7 the change, but it won’t program automatically. You have to hold the Preset Group switch down in order for it to program. To prove this, activate Preset Group 1. Overdrive, Mo’ EQ and Chorus should all be engaged. Hit a bunch of individual switches, whatever you want.
- Page 8 On the Mo’ Control, that pedal is conveniently built in to the unit. You’re already connected by means of the stereo-to-2-mono insert cable. Here’s how it works. For purposes of the following explanation, let’s define the states of the foot pedal itself. When the “heel”...
- Page 9 4. Bassynth Mix: 4 (on the “Synth” side) 5. Mo’ EQ Treble: +5 6. Mo’ EQ Midrange: +10 7. Mo’ EQ Bass: + 5 Make sure the Bassynth and Mo’ EQ effects are engaged, and the Filter Sweep Pedal is fully “closed”...
- Page 10 HOW MO’ CONTROL CAN ACT AS A MIDI CONTROLLER You’ve probably noticed the “MIDI Out” jack on the back of your Mo’ Bass. You also may have noticed that the MIDI Out function of the Mo’ Bass is only possible when used in conjunction with the Mo’ Control, and that your Mo’...
- Page 11 Q: Why can’t I program any Preset Groups? I’m holding the switch down, but all it does is turn the group off. A: Set the Preset Group Mode switch on Mo’ Control’s rear panel to “Program.” Q: I’d like to make the Mo’ Control a part of my custom pedalboard, but the rubber feet are keeping me from being able to velcro the bottom down to the pedalboard itself.
- Page 12 Authorized SWR Dealer. This warranty applies only to products purchased in the USA or Canada. This warranty is VOID if the unit has been damaged due to accident, improper handling, installation or operation, shipping damage, abuse or misuse, unauthorized repair or attempted repair, or if the serial number has been defaced or removed.
Need help?
Do you have a question about the mo'CONTROL and is the answer not in the manual?
Questions and answers