Advertisement
Overview
Front Panel:
1
1 Power indicator LED is lit when Hot Stone is powered on.
2
5.5mm x 2.1mm DC output jacks
Rear Panel:
3 AC Input Voltage Switch – set to proper voltage prior to plugging in the Hot Stone.
4
AC Inlet - standard IEC connector.
The Hot Stone Deluxe has a replaceable cartridge type fuse. Should your Hot Stone
Deluxe stop working, where there is no power being supplied to your pedals and
the green power indicator on the Hot Stone front panel is not lit, it is recommended
to check the condition of the fuse.
To access the fuse, first be absolutely certain that the unit is detached from
its AC power cable. Then, remove the 2 flat head screws along the bases of the
front and rear panels. Carefully remove the bottom cover from the unit. The fuse
is located at the AC power cable inlet connector. Please be sure to replace the fuse
with the same type and rating: 5x20mm, 250V/500mA SLO BLO
3
FUSE REPLACEMENT
2
4
Advertisement
