Preparation; Connections; Connecting Speakers And Source Components - Yamaha A-S201 Owner's Manual

PREPARATION

Connecting speakers and source components

Make sure to connect L (left) to L, R (right) to R, "+" to "+" and "–" to "–". If the connections are faulty, no sound will
be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and
lack bass. Refer to the owner's manual for each of your components.
Make sure to use RCA cables to connect audio components.
CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the
speakers.
CD player
Audio
out
GND
Turntable
y
• The PHONO jacks are designed for connecting a turntable with an MM cartridge.
• Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise
without the GND connection.
8
En

CONNECTIONS

DVD player, etc.
Audio
out
Audio Audio Audio
out out out
Tuner
Right
Audio
in
CD recorder,
Right
etc.
Speakers A
Left
Left
Speakers B