Table of Contents
Advertisement
When you press the Start/Reset button to pause during washing, the running indicator will
stop blinking and the dishwasher will beep every minute unless you press the
Start/Reset button to start.
1
A cycle that is underway can on ly be modified if it has been running for a short time. Otherwise, the
detergent may have already been re leased, a nd the appliance may have already drained the wash water.
If this is the case, the detergent disp enser mu st be refilled (see " Loading the Detergent " section).
2
Press the Start/Pause button and the machine will be in standby mode. Press the program button for mode than 3
seconds to change the program to the new desired cycle setting (see "Starting a wash cycle" section).
3
The program lights show the state of the dishwasher:
a) One of the program lights on--------------------------------------pause
b) One of the program lights blinking-----------------------------------run
c) Some of the up thre e pro gram lights quick flashing------------error
If you open the door
stop blinking and the buzzer will sound every minute unless you close the door . After
you close the door the dishwasher will continue working after 10 seconds.
A forgotten dish can be added any time before the detergent cup opens.
1
Press the start/pausebutton
2
Open the door a little to stop the washing.
3
After the spray arms stop working, you can open the door
completely.
When the wo rking cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button and open the door of the dishwasher.
Wait for a few minutes before unlo ading th e dishwasher to avoid ha ndlin g the dishes and utensils while they
are still hot and more susceptible to break age. The y will also dry better.
Switch Off the Dishwasher
Switch off the dishwasher by pressing the ON/OFF button.
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
during a wash cycle
It is dangerous to open the door during washing, the hot water may scald you.
the dishwasher will pause. The light indicator will
4
Add forgotten dishes.
5
Close the door
Press the start/reset button, the dishwasher will run
6
after 10 seconds.
10
Advertisement
Table of Contents
