Memrecam GX-5 User Manual page 28

1.2.3 Camera Head Sensor
The sensor is shown below.
Always replace the cap to protect the sensor when the camera head is not in use.
Take care to avoid dirt or other contaminants from entering in contact with the
Warning
sensor.
1.2.3 Camera Head LED
There is an LED on the cable en
LED Not Lit – Power Off
(00200)
(Figure 1-9)
Figure 1-9 Sensor
d of the camera head that shows its status.
LED RED – Abnormality
(Signal: UNLOCK)
1-13
LED GREEN – Normal
(Signal: LOCK)