Ver. 1.0
(16) Release the Harnesses from 2 Harness
Clamps.
(17) Disconnect the Harness on the CST2 PC Board
(CN774).
(18) Remove 2 Screws (Y3).
(19) Remove the Lift Up Motor (3132).
(20) Release the Harnesses from 2 Harness
Clamps.
(21) Disconnect the Harness on the CST2 PC Board
(CN774).
(22) Remove 2 Screws (Y3).
(23) Remove the Lift Up Motor (3132).
84
DP-8020E/8020P/8016P
SEP 2006