Stealth Bomber Owner's Manual page 21

RST R1 forks - Refer to the RST Owner's manual for more details.
Compression and rebound adjusters can be found at the top and bottom of the right hand fork leg respectively.
White Brothers Groove 200 forks - Refer to White Brothers Owner's manual for more details.
CAUTION: Pressures must not vary beyond 50-175psi in this chamber as serious injury due to chamber failure
may occur.
Spring preload can be adjusted using the air preload (or nitrogen) adjuster valve located at the bottom right hand fork
leg.
Compression and rebound adjustment can be found at the top and bottom of the right hand fork leg respectively.
FIGHTER
Rear Shock
WARNING
This is a sealed unit and servicing should only be carried out by a qualified repair person.
1. Unlock the preload adjustment by loosening the bottom lock ring on the spring unit using the supplied C
spanner.
2. Rotate the spring and collet to increase or decrease the spring tension.
3. Re-lock the preload adjustment by turning the bottom lock ring clockwise until it locks against the spring
retaining ring.
4. Tighten with C spanner.
5. Increase or decrease the rebound damping by turning the red rebound adjuster dial in the direction
required (as indicated on the top of the shock body).
6. Increase or decrease the compression damping by turning the blue compression adjuster dial in the
direction required (as indicated on the bottom of the shock reservoir).
Stealth Electric Bikes Owner's Manual
Compression adjustment Rebound adjustment
21