Rear View/ Terminal Board - Marantz PD4230V User Manual

Rear View/ Terminal Board

C
E
F
G
H
HDMI
I
A AC IN
Connect the included power cord here.
B EXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the
EXT SPEAKER terminal and the
speaker wire to the
both LEFT and RIGHT channels.
Please refer to your speaker's User Guide.
C VIDEO1, 2, 3 (BNC, RCA, S-Video)
Connect VCR's, DVD's or Video Cameras, etc. here.
D AUDIO1, AUDIO2, AUDIO3
These are audio input terminals.
The input is selectable. Set which video image to allot
them from the audio menu screen.
E DVD1 / HD1
Connect DVD's, High Definition or Laser Discs, etc.
here.
D
(positive) speaker wire to the
(negative)
EXT SPEAKER terminal on
A B
F DVD2/ HD2, RGB2
DVD2/ HD2: You can connect DVDs, High Definition
sources, Laser Discs, etc. here.
This input can be set for use with an
RGB or component source.
(see page 25)
RGB2: You can connect an analog RGB signal
and the syncronization signal.
G RGB1 (D-Sub)
Connect an analog RGB signal from a computer, etc.
here.
H DVD3/HD3, RGB3 (HDMI)
Connect a digital signal (TMDS) from a source with a
HDMI output.
This input can be set for use with an RGB3 or DVD3/
HD3 source. (see page 26)
I
EXTERNAL CONTROL (D-Sub)
This terminal is used when operating and controlling
the monitor externally (by external control).
13