The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Russound TVA2.1 Installation Manual...
The front panel LED illuminates orange when the amplifier is in short circuit protection. If this fault condition occurs, turn off the The TVA2.1 provides an array of useful features, such as IR Learning, use of a amplifier and check speakers for short circuit conditions when appropriate.
If wiring your own 3.5mm plug to a receiver, the tip - is positive and the sleeve distraction when installed behind a TV. is negative. The external IR receiver is used to control the volume of the TVA2.1 Note: Disabling the LED will only disable the "normal" power status LED. The using a standard remote control once the commands have been taught to the TVA2.1.
(Vol +, Vol -, and Mute) from your current remote control. 1. Disable TV Speakers - Since you will be using the TVA2.1 for all of your TV 1. Press the IR Learning Button for 2 seconds until the IR Confirm LED blinks audio, your TV's internal speakers should be disabled.
Frequency Response: 40Hz to 20KHz +/- 1dB, 20Hz -3dB, Sub Out: -3dB at 170Hz Input Impedance: >22 ohms Power Requirements: 24VDC 3.75A (External power supply) Dimensions: 6.0”H x 9.875”W x 1.375”D (15.2 x 25.0 x 3.5 cm) Weight: 2.0lbs. (0.9kg) Russound TVA2.1 Installation Manual...
LIMITED WARRANTY The Russound TVA2.1 Amplifier is guaranteed against all defects in materials Before returning a unit for repair, call Russound at (603) 659-5170 for a Return and workmanship for two (2) years from the date of purchase. During this Authorization number.