Bosch ZBR16-3A Series Installation And Service Instructions Manual page 82

82 | Commissioning log for the appliance
Modified service functions: (Select the modified service functions and enter the values here.)
Example: Service function 7.d changed from 00 to 01
Heating control:
 FW 200
 FB 100 × ...... Qty, coding heating zone(s):
 ISM 2
 IPM 2 × ...... Qty, coding heating zone(s):
Other:
 Heating control programmed, notes:
 Documented the modified settings of the heating control in the control operating/installation instructions
The following work has been carried out:
 Electrical connections checked, notes:
 Condensate trap filled
 Function check carried out
Commissioning includes checking the settings, a visual heating leak test and a functional check of the boiler and control. The system installer
conducts a test of the heating system.
This system has been checked to the extent described.
___________________________________________________________
Name of service installing contractor
____________________________________________________________
Date, system installer's signature
6 720 806 992 (2015/03)
 Carry out a combustion air/flue gas test
 Tightness test carried out on the gas and water sides
The documents have been handed over to the home owner/operator. The
home owner/operator has been instructed regarding safety and operation
of the boiler and accessories, including the need for regular scheduled
maintenance.
__________________________________________________________
Date, owner/operator signature
Affix the test report here.
Greenstar