Remote Control Operation
Temperature adjustment in AUTO SELECT mode
To adjust the air temperature during AUTO SELECT
mode, point the remote control toward the indoor air
conditioning unit:
1) Press the
1°C or 1°F.
2) Press the
point temperature 1°C or 1°F.
COOL/HEAT & FAN/DRY mode
Point the remote control toward the indoor air condition-
ing unit:
1) Press the ON/OFF
2) Press the MODE
operation; COOL, DRY, HEAT/FAN or AUTO.
3) Press the
perature.
Heat
64°F- 88°F
(16°C-31°C)
Once minimum or maximum setting is reached
operation will be continued by
pressing
4) Press the FAN SPEED
sired air flow rate.
Press the ON/OFF
Notes:
• In the COOLING-ONLY operation, the HEAT
mode will disable, and it will go to FAN mode.
• The settings can be changed even while the air
conditioner is off.
OPERATION SECTION FOR
HF-51/HF-70 & HFR-51/HFR-70
button once, to raise the set point
button once, to reduce the set
button.
button, select the mode of
or
to set the desired tem-
Cool
64°F- 88°F
(16°C-31°C)
or
button to set the de-
button again to stop.
29