Repeater Talk-Around (Ta); Horn Alert Function (Ha); Public Address Function (Pa) - Kenwood TK-630 series Instruction Manual

(3)
First-priority (P1 ) channel
(P1
= Fixed-operator selectable)
To delete the currently displayed priority
1
channel from the scan list on a
radio in which the first priority is operator selectable, hold down the SCN
switch and press the D/A switch three times.
The P1 indicator goes off and the channel becomes a non-priority channel.
Then hold down the SCN switch, and press the D/A switch. The CHANNEL
ADD indicator
(-)
goes off.
selectable
/
Group scan = multi)
To delete the currently displayed group of channels from the scan list, hold
down the SCN switch and press the GROUP DOWN switch. The GROUP
ADD indicator
( - )
goes off, and all the channels in that group are deleted
from the scan list.
(4)
Groups (KCH-4: Full featured front panel
/
Group lock out = operator
4-7.
REPEATER TALK-AROUND (TA)
TALK-AROUND is useful when you are close to other mobiles with whom you
wish
to
talk, or are outside the range of your repeater system.
If you are using the repeater, press the TA switch momentarily. A confirmation
tone sounds, and the TA indicator lights. The transceiver can then transmit
without using the repeater.
To use the repeater, press the TA switch momentarily again. A confirmation
tone sounds, and the TA indicator goes off.
4-8.
HORN ALERT FUNCTION (HA)
An option for calling is required to use this function.
If you are called from the base station while you are away from your transceiver,
you are alerted by the vehicle horn or some other type of external alert. To turn
the horn alert function on when you go away from your transceiver, press the
HA switch momentarily. A confirmation tone sounds, and the display shows
HORN ALERT (or HA).
If the HA switch is pressed again, horn alert function is turned off.
4-9. PUBLIC ADDRESS FUNCTION (PA)
Public Address amplifies the microphone audio and outputs it through a
dedicated PA speaker. The 20 W (maximum rating) speaker is usually a normal
cab-type speaker mounted inside a large vehicle such as a bus, or a weather-
proof speaker mounted external to the vehicle.
?A
mode is activated by pressing the front panel PA key (or other designated
swjtch). A confirmation tone sounds, and the display shows PUBLIC ADRS (or
FA).
r A
can be activated at anytime (scanning or non-scanning). The radio
continues to scan (if enabled) & receive calls while in
PA
mode. Pressing PTT
activates PA and will override an incoming call at anytime; however, no radio
transmission takes place. If PA is pressed again, a confirmation tone sounds,
the display returns
to
the normal channel or SCAN (SC) display, and the PA
function is defeated.
-,"