Function Table - Daewoo FR-540N Service Manual

2) Function table

Control
NO.
Function
1 Initial
operation
2 Clock
function
3 Freezer
temperature
control
Control
Objects
Time 1. In the initial operation, the temperature of FRZ. and REF.
Temperature automatically set at 3/3.
control
2. The clock is set at 12:00.
FUZZY
LED 1. The time is set at 12:00 in initial operation.
2. Time setting
1) When the time set button is pressed, the hour/min. indicator
blinks with 0.5 sec. interval.
2) Adjust the time with hour button and min. button.
3) If the clock is set to desired time, press the time set button
again.
4) If the hour and min. button are not used in 5 sec. during the
blink, and then the clock setting function is canceled
automatically.
FUZZY
COMP. 1. The temperature can be controled by 6 steps with the freezer
F-fan temperature button.
C-fan
3 4
LED
FUZZY
2. The bar LED will indicate according to the freezer temperature
button. The bar LED is fully illuminated once and then
illuminated up to the each temperature level.
3. A single upper bar LED on/off according to the COMP. off/on.
Contents
QUICK FREEZER
FREEZING TEMP.
FRZ.
4 5 Q.
F
E.F 1 2 3
FUZZY
QUICK FREEZER
FREEZING TEMP.
FRZ.
4 5 Q. F
E.F 1 2 3
FUZZY FUZZY
5 E.F 1 2 3
QUICK FREEZER
FREEZING TEMP.
FRZ.
4 5 Q. F
E.F 1 2 3
FUZZY
FRZ.
COMP ON
E.F 1 2 3
FRZ.
COMP OFF
E.F 1 2 3
23
QUICK FRIDGE TIME
FRIDGE. TEMP. SET
REF.
FRESH
Q. F 5 4
3 2 1 E. F
CLEAN
HOUR MIN
QUICK FRIDGE TIME
FRIDGE. TEMP. SET
REF.
FRESH
Q. F 5 4
3 2 1 E. F
CLEAN
HOUR MIN
QUICK FRIDGE TIME
FRIDGE. TEMP. SET
REF.
FRESH
Q. F 5 4
3 2 1 E. F
CLEAN
HOUR MIN
4 5 Q. F
4 5 Q. F
Remark