Advertisement
Warning:
w
Unless specifically instructed in
this guide, be careful not to touch
the fuser, which is marked
CAUTION HOT SURFACE and
CAUTION HIGH TEMPERATURE,
or the surrounding areas. If the
printer has been in use, the fuser
and the surrounding areas may be
very hot. If you must touch one of
these areas, wait 40 minutes to
allow the heat to subside before
doing so.
1
2
Note:
Place the cartridge on a clean, flat
surface.
Jam A B (Cover A or B)
3
Note:
When jammed paper cannot be
removed easily, turn the roller to take
tension off the paper, then pull it
straight out.
4
Note:
When the optional Duplex Unit is
installed, open the Duplex Unit's
cover before opening Cover B.
5
Warning:
w
Be careful not to touch the rollers in
the fuser unit, they may be very hot.
6
7
Note:
If you installed the Duplex Unit, close
the Duplex Unit's cover after closing
Cover B.
8
Note:
Insert the cartridge with the arrow
mark on the top of the imaging
cartridge facing toward Cover A.
9
Advertisement
