Advertisement
Warning:
w
Unless specifically instructed in this guide,
be careful not to touch the fuser, which is
marked CAUTION HOT SURFACE and
CAUTION HIGH TEMPERATURE, or the
surrounding areas. If the printer has been
in use, the fuser and the surrounding areas
may be very hot. If you must touch one of
these areas, wait 40 minutes to allow the
heat to subside before doing so.
1
2
Note:
Place the cartridge on a clean, flat surface.
Jam A (Cover A)
3
Note:
Only touch the green part of the pickup roller.
Touching any other parts may cause a paper jam.
4
5
Note:
Insert the cartridge with the arrow mark on the
top of the imaging cartridge facing toward Cover
A.
6
Advertisement
