Reassembly - Robin EC03ER Service Manual

(6) Remove reel from starter case as shown in
Fig. 24.
Take out .reel slowly turning it lightly
toward left and right to remove spring from
hook.
- [NOTE]
Do not remove reel quickly or the spring may
escape from starter case.
If the spring escapes, put it in the starter case
as instructed in page
23, 4-4 HOW TO DO' IN
TROUBLES.
(7) Untie starter rope from the knob and
remove.
4- 2 REASSEMBLY
(1) Check that spring is securely set in the reel.
(2) Adjust the position of inner end of the
spring so it catches hook of the reel securely.
[NOTE]
I
The shape of starter spring inner end can be
adjusted with plier if necessary.
(3)
Prior to installing reel in starter case, wind
starter rope in reel for 2.5 turns in
arrowhead direction as shown in Fig. 25.
(4) Then let rope out of reel from notch on
reel. Line up reel hook with inner end of
spring as shown in Fig. 26 and install reel
in starter case.
(5) Hold starter rope, as shown Fig. 27 and turn
(6) Firmly press the reel not to allow reverse
reel 3 times in arrowhead direction.
turn.
Fig. 24
Fig. 25
I
OUTER END OF SPRING
INNER END OF SPRING
Fig. 26
n
f-7
\
, '
f - 7
- 22
-