Important Safety Precautions - DTX Vortex Owner's Manual

Important Safety Precautions

CAUTION
• DO keep your work area clean, well-lit and
free of clutter or obstruction.
• DO wear proper eye protection when
servicing, cleaning or maintaining your
machine such as safety glasses.
• DO ensure that your Vortex machine is
properly grounded to avoid potential
electric shock.
CIRCUMSTANCES SHOULD YOU
ATTEMPT TO USE AN UNGROUNDED
OUTLET.
• DO unplug your
any service or maintenance to prevent
potential electric shock.
• DO read and refer to these precautions,
warnings and instructions before you
operate this machinery. Please refer to
this manual often.
FAILURE TO FOLLOW THESE
WARNINGS COULD RESULT IN
SERIOUS INJURY OR DEATH.
DTX International will not be responsible
for injury that occurs as a result of failure
to follow these precautions.
TM
UNDER NO
TM
Vortex machine before
Copyright 2012 DTX International All Rights Reserved
To minimize the risk of injury, read and heed these
important safety precautions when operating this
machine. Following these precautions, as well as
general safety rules as you would for any work area,
will help to prolong the life of your machine.
• DO NOT
machine. Altering your machine will void
your warranty and could result in serious
injury or death to yourself, other workers
or the public.
• DO NOT
machine in water. Immersion may result in
damage to the machine. Use minimal
water in the cleaning process and remove
excess water when reassembling.
• DO NOT
public, and especially children to operate
or have direct physical contact with the
machine.
ONLY.
older.
• CAUTION!
at 3500 RPM. All operators MUST keep
their body well away when machine is in
operation. Keep jewelry, long hair, hands
and face away from the floss head to
avoid serious injury.
• DO NOT
potentially clog the machine
2
make any alternations to your
immerse any part of your
allow untrained personnel, the
FOR COMMERCIAL USE
All operators must be 18 years or
Spinning floss head operates
clean with detergent. This may
.