DTX Vortex Owner's Manual page 16

Cart Assembly - Handle
14) Install one of the handle brackets ( ) on the edge of the shelf ( ) so that the open end of the
bracket is facing inward. Use two tapered bolts (
bracket. See Figure CC
15) Place one end of the handle ( ) into the not attached handle bracket. While holding the handle in
place set the other handle bracket ( ) in position and secure with the remaining two tapered bolts (
and 8mm nuts ( gg ).
Figure CC
I
+
dd gg
Congratulations! Your Great Northern Cotton Candy Cart is now finished. You may now
reinstall your gray cover and return to
best cotton candy you ever tasted!
I
.
H
I
See Figure DD .
Copyright 2012 DTX International All Rights Reserved
dd ) and two 8mm nuts (
Page 8 to complete your setup and begin making the
16
B
gg ) to secure the handle
Figure DD
H
dd )