Vivotek SD8363E-M User Manual page 138

VIVOTEK
daylight_enable
daylight_dstactualmode
daylight_auto_begintime
daylight_auto_endtime
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
138 - User's Manual
<boolean> 0
1~4 1
string[19] NONE
string[19] NONE
string ,-360,-320,
-280,-240,
-241,-200,
-201,-160,
-140,-120,
-80,-40,0,
40,41,80,
81,82,83,
120,140,
380,400,48
0
0, 0
3600,
86400,
604800,
2592000
0, N/A
<positive
integer>
0, N/A
<positive
integer>
0~ N/A
6/6 Enable automatic daylight saving
time in time zone.
6/7 Check current status of is
daylight saving time.
(Used internally)
6/7 Display the current daylight
saving start time.
6/7 Display the current daylight
saving end time.
6/6 List time zone index which
support daylight saving time.
6/6 0 to Disable automatic time
adjustment, otherwise, it
indicates the seconds between
NTP automatic update intervals.
7/6 Restore the system parameters
to default values after <value>
seconds.
7/6 Restart the server after <value>
seconds if <value> is
non-negative.
7/6 Restore the system parameters
to default values except
(ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate
with other "restoreexceptXYZ"
commands. When cooperating
with others, the system
parameters will be restored to