Samsung PE40C User Manual page 88

3
Using MDC
Volume
2
The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
The volume can be adjusted using the slider bar in the range of 0 to 100.

Adjust the volume of a selected display.
Mute
Enable or disable Mute for a selected display.

Mute will automatically be disabled if Volume is adjusted when Mute is on.
Alert
3
Fault Device

This menu shows a list of display devices which have following errors - fan error, temperature

error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button
to refresh the error status of the display device. The recovered display device will disappear
from the Fault Device List.
Fault Device Alert

Display device in which error is detected will be reported by email.

Fill in all required fields. The Test and OK buttons will be enabled. Ensure the Sender
information and at least one Recipient are entered.
88
3 Using MDC