Pc Screen Adjustment; Resolution Select; Auto Adjustment - Samsung PE40C User Manual

4
Screen Adjustment
To use the

Component
1
Press the
2
Select Zoom
3
Press the [
4
Press the
5
Press the [
6
Select Close
If you want to reset the picture to its original position, select
The picture will be set to its default position.

4.3.3 PC Screen Adjustment

Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use
the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the
noise has been reduced, re-adjust the picture so that it is aligned with the center of screen.
Position: To adjust the PC's screen position if it is not centered or does not fit the product screen. Press
the or button to adjust the Vertical Position. Press the
Position.
Image Reset: Resets the image to the default settings.
This option is available when the input source is PC.

4.3.4 Resolution Select

If the picture is not normal even when the resolution of the graphics card is one of the following, you can
optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions:
This option is available when the input source is PC.
4.4

Auto Adjustment

m
MENU [
Zoom/Position function after selecting
(1080i/1080p) or Custom, follow these steps.
button to select Zoom/Position.
or Position.
] button.
/ / / button to move the picture.
] button.
by pressing the and
Off / 1024 x 768 / 1280 x 768
] Picture Auto Adjustment
Screen Fit in HDMI
buttons sequentially.
Reset
or button to adjust the Horizontal
/ 1360 x 768 / 1366 x 768
[ ]
ENTER
(1080i/1080p) or
in the Zoom/Position screen.
123
4 Screen Adjustment