Wps(Pbc) - Samsung PE40C User Manual

7
Network
13
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the
14
When done entering the
15
Press the
16
Repeat the same entry process for
17
When done, select
screen appears and the verification process starts. When the connection has been verified, the
"Internet is connected successfully." message appears.

7.1.5 WPS(PBC)

How to set up using WPS(PBC)
If your router has a
1
Go to Network Setting
2
Select Start, press [
3
Press the WPS(PBC)
the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
or button to change the number one unit at a time.
IP Address, press [
button to go to the Subnet Mask
Subnet
OK at the bottom of the page, and then press [
WPS(PBC) button, follow these steps.
screen.
], and then press [
button on your router within 2 minutes. Your product automatically acquires all
IP Address.
].
fields, and then press [
Mask, Gateway, and DNS
] again.
].
Server.
]. The network connection
147
7 Network