Zoom/Position - Samsung PE40C User Manual

4
Screen Adjustment
Do not set your product to 4:3 format for a long time. The borders displayed on the left and right,
or top and bottom of the screen may cause image retention (screen burn) which is not covered by
the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or

Component (1080i / 1080p) signals are inputted.
Custom: Changes the resolution to suit the user's preferences.

Original Ratio: If the input source is PC, DVI,

the original aspect ratio.
Available ports may differ depending on the model. (page 32)
You can adjust and store settings for each external device you have connected to an input on the
product.
Picture Sizes available by Input Source.
ATV
AV, Component
DTV (1080i)
Component
HDMI (720p, 1080i, 1080p)
PC, DVI, DP,
(when a PC is connected)

4.3.2 Zoom/Position

Adjusts the picture position.
or Screen fit.
To use the Position

steps.
1
Press the
2
Press the [
3
Press the
4
Press the [
5
Select Close
Reset.
Input Source
(480i, 480p)
(1080i, 1080p)
HDMI
Position is only available if
function after selecting Zoom1, Zoom2,
button to select Position.
] button.
or button to move the picture up or down.
] button.
by pressing the and
HDMI (PC connection), or DP, the video will display in
Picture Size
16:9, Zoom1, Zoom2,
16:9, Zoom1, Zoom2, 4:3,
16:9, 4:3, Smart View
16:9, 4:3, Wide Fit,
16:9, 4:3, Smart View
Custom, Wide Fit,
16:9, 4:3, Original Ratio
Picture Size is set to Zoom1, Zoom2,
Wide Fit
buttons sequentially. To reset the picture position, press
4:3
Custom
2, Wide Fit, Screen Fit
Screen Fit, Custom
1, Smart View 2,
Screen Fit
Wide Fit
or Screen fit, follow these
4 Screen Adjustment
122