Installation; Auto Scan - Apollo AHD-91 Instruction Manual

ENG

INSTALLATION

Press <Menu> to enter main menu.
Press ◄ / ► until switching to "Installation".
Press ▼ to enter the "Installation" menu.
Press ▲ / ▼ to focus on "Antenna setting" bar.
Press ◄ / ► to change antenna settings.
Press ▲ / ▼ to focus on "Country Setting" bar.
Press ◄ / ► to select country.
Press ▲ / ▼ to select "Auto Scan" or "Manual Scan".
Press <Exit> to exit menu.
Note:
After changing "Country Setting", current time zone would adjust to the corresponding region of the
country. At the same time, the time display on STB would base on the new time zone too.

AUTO SCAN

Press <OK> to confirm "AUTO SCAN".
Press <OK> to confirm the empty action and start auto scan.
Note:
Auto scan implementation needs several minutes
In scanning, user can press <Exit> to cancel auto scan any time.
And when scan finished, the result would be showed to tell user how many TV&Radio services are found
this time.
9