Advertisement
T
T
OPERATION
The Innersound Reference Preamplifier is a sophisticated, computer
operated unit that has many functions. Despite its complexity, it appears
very simple. Great care and thought were put into making it "user
friendly" and ergonomically well designed. All of the following functions
are available from the front panel controls and by remote control. Each
function is listed below with directions on how to operate it.
IIIPUT SELECTIOII
Press the appropriately labeled button on the front panel to select a
source. When activated, a small, blue LED above the switch will light.
The four "main" inputs (CD, Tuner, Video, Aux) operate together so that
selecting any one of these inputs switches out the others.
The "Monitor" button toggles between your recorder and whatever main
input is selected. lf the recorder has a monitoring function (where the
recording can be played back during recording), you can set your
recorder for playback and by pressing the "Monitor" button, you can
switch between the input source and the recorder's playback. This way
you can "monitor" and compare the quality of your recording to the
source.
STAilDBYE
Use this switch to toggle between standbye mode and operation mode.
When in standbye, the display is turned off while the blue "standbye" LED
is illuminated. Standbye turns off the signal outputs while still keep the
remaining audio circuits in full operation.
Advertisement
