Advertisement
SPECIFICATIONS
CIRCUIT SPECIFIGATIOIIS
ffiprrts
Six inputs at line level, inctuding a tape loop- Three inputs offering
balanced using XLR connector-
Outputs
Three outputs at line level. One fixed level output (monitor loop) and two
controlted by electronic attenuator, (both with balanced and single
ended).
Bcndwtdth
Dlstortlon
Less than 0.01% from l0
higher, shunted bY 1000
Goln
Hz to 40 kHz @ 5 volts oeak into 600 ohms or
pF or less.
Input lmpedonce
47k ohms balanced or single-ended
ilolse
Greater than 100 dB below 1 volt reference
Ontput lmpedrrnce
50 ohms, non-reactive, batanced or single-ended
torlrnum
OutPUt
ct1osstoltr
Better than 70 dB @ 20 kHz
Advertisement
