Comfort Adjustments - Pride Mobility Bebop Owner's Manual

V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the scooter is in motion.
TILLER ANGLE ADJUSTMENT
Your PTV is equipped with an adjustable pivoting tiller
that you can adjust in any position to maximize your
ergonomic comfort.
1. Turn the tiller adjustment knob counterclockwise to
loosen the tiller. See figure 9.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to secure
the tiller in position.
NOTE: In order to lower the tiller to the PTV deck,
you must first remove the seat.
SEAT ROTATION
The seat can be rotated to one of four positions in 90°
increments.
1. Pull up slightly on the seat.
2. Rotate the seat 90° or 180° to the right or left to the
desired position.
3. Lower the seat and be sure it is locked into position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 10.
1. Remove the seat from your PTV.
2. Use the attached ring to pull and remove the detent
pin from the lower seat post.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, match
up the adjustment holes in the seat post mounted bat-
tery pack lock, and upper and lower seat posts.
5. Fully insert the detent pin.
6. Replace the seat.
24
TILLER ADJUSTMENT
KNOB
Figure 9. Tiller Adjustment
UPPER SEAT POST
SEAT POST MOUNTED
BATTERY PACK LOCK
LOWER SEAT POST
DETENT PIN
Figure 10. Seat Height Adjustment
bebop