Download Print this page

Sony PRSA-CL1 User Manual

Hide thumbs

Advertisement

Quick Links

E
A
B
CD
Insert tab
/AI
of the cover in hole
[ftJ
of the Reader.
®
Pull the tab of the cover towards
[g.
®
Insert the Reader in the direction of
[Q)
to attach it to the cover.
o
Check that the tabs ofthe cover are completely inserted in the holes of the
Reader.
mmJ
• If the batteries are running low, the difference in brightness between. (High) and •
(Standard) may be lost.
CD
Insert tab
[f]
of the cover in hole
I!iJ
of the panel.
®
Pull the tab of the cover towards
[8].
®
Insert the panel in the direction of
IT]
to attach it to the cover.
o
Check that the tabs of the cover are completely inserted in the holes of the panel.
If the panel comes off
Follow the steps below to attach the panel to the cover.
4
To turn off the panel
Slide the power switch to OFF.
mmJ
• The panel of the cover
[!;]
cannot be folded back beyond the position show in the
above figure, though the cover can be folded. If you fold back the panel forcefully, the
panel may be damaged.
5
set the panel on the right side.
11111111111111111111111111111111111111111111111111111
..
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference, and (2)this device must
accept any interference received, including interference that may cause undesired
6
operation.
• You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.
3
Insert two size AAA batteries (supplied), and close the cover of the battery
case.
Match the
0
on the batteries to the
0
in the battery case.
WARNING
Before use
Owner's Record
The model number is located on the upper part of the battery case, and the serial
number is located inside the battery compartment. Record them in the space provided
below. Refer to these numbers in the spaces whenever you call upon your Sony dealer
regarding this product.
Model No.
_
Serial No.
_
Before using this cover, please read this manual thoroughly and retain it for future
reference. See also the manuals provided with the Reader.
The Sony PRSA-CL 1 is the cover for the Sony PRS-505 Portable Reader System.
How to use
1
Remove any currently attached soft cover on the Reader (this includes the soft
cover that is supplied with the PRS-505 or any optional soft cover).
For details on removing the soft cover, see the User's Guide of the Reader.
2
Open the cover of the battery case.
Push the mark to slide the cover of the battery case, then remove the cover.
I
:min"
II
mmD
• Do not mix an old battery with a new one, or mix different battery types.
• It you do not use the cover for a long period of time, remove the batteries to avoid
damage from battery leakage and corrosion.
• Replace batteries with new batteries when the panel light loses its brightness.

Advertisement

loading

  Related Manuals for Sony PRSA-CL1