Impassa SCW9055-433 Installation Manual page 45

Advanced Programming
Special Installer Functions
(Accessible through Installer Programming)
[898] Wireless Device Enrollment (See Section 2)
[899] Template Programming (See Section 3)
[900] Panel Version
Not Programmable (e.g. Ver. 1.0 = 0100)
|______|______|______|______|
[904]-[907] Wireless Device Placement Test
Enter [*][8][Installer Code][904], [905] [906] or [907] to placement test wireless zones, keypad, sirens and repeaters respectively. See
"Wireless Device Setup" on page 9.
[908] Wireless Modules
Enter [*][8][Installer Code][908] to display all wireless modules enrolled on the system. Scroll to display the name and slot number of
each device. e.g., an indoor siren enrolled on slot one is displayed as 'WT49X1 1.'
[990] Installer Lockout Enable
Enter [990][Installer Code][990]
[991] Installer Lockout Disable
Enter [991][Installer Code][991]
[992] Alternate Communicator Label Broadcast
Enter [992][*] Note: Perform the alternate communicator label broadcast at the SCW9055/57 main unit.
[996] Restore Wireless Device Programming Factory Defaults
Enter [996][Installer Code][996]
[998] Restore Panel Default Programming
Enter [998][Installer Code][998]
[999] Restore Factory Default Programming
Enter [999][Installer Code][999]
39