PEUGEOT 5008 Handbook page 216

Checks
F Obtain a bottle of AdBlue
checking the use-by date, read carefully
the instructions on use on the label before
pouring the contents of the bottle into your
vehicle's AdBlue ® tank.
Important: if your vehicle's AdBlue
is completely empty - which is
confirmed by the alert messages and
the impossibility of starting the engine -
you must add at least 3.8 litres (so two
1.89 litre bottles).
214
F After emptying the bottle, wipe away any
spillage around the tank filler using a damp
cloth.
If any additive is split or splashed, wash
immediately with cold water or wipe with
a damp cloth.
® . After first
If the additive has crystallised, clean it
off using a sponge and hot water.
F Refit the blue cap to the tank and turn it a
6
th
of a turn clockwise, to its stop.
F Refit the black plastic blanking plug,
clipping it in place.
F Lower the cut-out in the boot carpet.
®
tank
F Unfold and reposition the concertina floor.
Important: in the event of a top-up
after a breakdown because of a
lack of additive, signalled by the
message "Top up emissions additive:
Starting prevented", you must wait
around 5 minutes before switching
on the ignition, without opening the
driver's door, locking the vehicle or
introducing the key into the ignition
switch.
Switch on the ignition, then, after
10 seconds, start the engine.
Never dispose of AdBlue ® additive
bottles in the household waste. Place
them in a special container provided
this purpose or take them to your dealer.